Initio INI-9100UW user manual 4 Select Initio driver

figure 7-4 Select Initio driver

6.The Initio host adapter driver is now installed

7.The on-screen instructions will continue for a complete installation of Windows-NT. Refer to your Windows-NT users manual for completion of the operating system installation procedure.

Adding or updating the Initio driver to an existing Windows- NT system:

For computer systems using other SCSI host adapters or an IDE drive to provide the system boot routine, these instructions will guide you through the INI-9100U/9100UW host adapter driver installation. The Windows-NT driver will be found on the INITIO INI-9100U/9100UW DRIVER DISK 1. It is important that the SCSI bus hardware and Windows-NT are installed and configured before proceeding further.

1.Once a Windows NT session is established, use your installed mouse or the appropriate key strokes to select MY COMPUTER from the Main Desktop. Execute the following steps:

∙Select CONTROL PANEL from within the MY COMPUTER group.

∙Select SCSI ADAPTERS from within the CONTROL PANEL group.

7-6