Initio INI-9100UW Installation basics, SCSI Devices Configuration, Host Adapter Termination, High

SCSI Devices Configuration	Host Adapter Termination
Internal devices only	On
External devices only	On
Internal and external devices	Off
table 2-1 INI-9100U possible termination settings

SCSI Devices Configuration	Host Adapter Termination
	Low
	High
68-pin internal connector only	On	On
68-pin external device only	On	On
50-pin internal only	On	On
68-pin internal and 68-pin external	Off	Off
devices
50-pin and 68-pin internal devices	Off	On
50-pin and 68-pin internal devices	Invalid Configuration
and 68-pin external device
table 2-2 INI-9100UW possible termination settings

Installation basics

The INI-9100U/9100UW PCI to SCSI Bus Master host adapter is installed into a computer system with a PCI bus. The host adapter supports 32-bit data transfers across the PCI bus at speeds up to 133 MBytes per second. The Initio host adapter has no switches or jumpers to set, increasing the ease of installation.

The SmartSCSI™ Setup Utility provides simple integration of the INI- 9100U/9100UW into most platforms and operating systems. The INI- 9100U/9100UW on board BIOS will allow for complete integration in those systems that implement Plug and Play. With the SmartSCSI™ Setup Utility you are able to conveniently turn on or off the SCSI auto-termination as well as manually control the SCSI terminators without opening the system unit to

2-4