Initio INI-9100UW user manual Main menu options, Scan Bus, Device Setup

Main menu options

The main menu provides five possible setup options for meeting your system configuration.

∙Scan Bus

∙Device Setup

∙Adapter Setup

∙BIOS Setup

∙Disk Utility

Scan Bus

This option scans the SCSI bus. All device ID’s are displayed on the screen including SCSI ID’s without devices attached. This allows for a better definition of location and priority on the SCSI bus.

∙A device ID should only be changed if it conflicts with another device address on the same bus. Refer to your peripheral documentation for changing SCSI ID’s.

∙The best ID for a bootable hard disk is SCSI ID 0.

Device Setup

All device ID’s for the INI-9100U/9100UW are displayed on screen, including SCSI ID’s without devices attached. This allows for a better definition of location and priority on the SCSI bus.

Asynchronous Transfer. Use this option to set the synchronous data transfer mode. The INI-9100U/9100UW host adapter will transfer data at a maximum rate of 5 MBytes per second in asynchronous mode and 20 MBytes per second in synchronous mode. The INI-9100UW host adapter will transfer data at a maximum rate of 10 Mbytes per second in asynchronous mode and 40 Mbytes per second in synchronous mode. Use this option to set the synchronous data transfer mode. The default setting for this option is for synchronous operation. (no)

4-3