Initio INI-9100UW user manual Adding the Initio Driver to an existing Windows 95 system

Adding the Initio Driver to an existing Windows 95 system

These instructions will guide you through the installation of the Initio host adapter to an existing Windows 95 system. Windows 95 will automatically detect the presence of new hardware in Plug and Play compliant systems. It is important that the Initio INI-9100U/9100UW hardware has been properly installed before proceeding further.

1.Microsoft Windows 95 will detect the presence of new hardware upon boot-up and will display a dialog window titled NEW HARDWARE FOUND and PCI SCSI BUS CONTROLLERS will be highlighted.

∙Select: DRIVER FROM DISK PROVIDED BY HARDWARE MANUFACTURER, then “OK”.

∙Select SCSI CONTROLLER from the list of available devices, then select “HAVE DISK...”

2.In the INSTALL FROM DISK window that is displayed, enter the Initio Driver path name:

∙Insert INITIO INI-9100U/9100UW DRIVER DISK 1 into drive A:

∙Type: A:\WIN95, select “OK”

3.Select INITIO INI-9100U/9100UW Host Adapter, select “OK”, then

“OK” again to install the INI910U.MPD driver onto your hard disk drive.

6-6