Initio INI-9100UW user manual Continue, Ctrl + Alt + Del

∙Choose CONTINUE to continue the installation sequence.

∙Choose CONTINUE to accept the Host Adapter selection.

4.Two installation options are available:

∙Choose EXPRESS INSTALL to install both the DOS ASPI drivers and the Windows 32-bit Disk Access drivers. Use this option if you are unfamiliar with configuring a DOS or Windows manually.

∙Choose CUSTOM INSTALL to select DOS ASPI drivers or the Windows 32-bit Disk Access drivers manually. Use this option only of you are familiar with configuring a DOS or Windows PC manually

5.Follow the on-screen directions and/or options to continue the installation.

∙Choose CONTINUE to accept the default directory or enter the full directory where you want ASPI drivers installed.

∙Choose CONTINUE after all the files have been copied and installed to your system.

∙Select YES to make the required changes to your system’s CONFIG.SYS and SYSTEM.INI configuration files.

∙Once the SETUP COMPLETE screen is displayed, choose

CONTINUE..

6.Last minute changes to this User’s Manual will be displayed in the README.TXT file that is shown. To exit the README.TXT file, use your installed mouse or the appropriate key strokes to select FILE, then EXIT from the Note Pad FILE MENU.

7.To complete the installation and activate the device driver, exit from your Windows 3.1x session and reboot the system by pressing

<CTRL> + <ALT> + <DEL>.

If a CD-ROM, tape drive, scanner, or optical drive is installed on your system,

a third party device driver is needed. A driver may be provided by the manufacturer and is used in addition to the Initio ASPI driver to provide proper support for that device. Please refer to your peripheral device manufacturer documentation for additional information.

5-4