Initio INI-9100UW user manual Device driver command line options, Driver config options

Device driver command line options

The Initio device driver supports command line switches to optimize driver operation. Device drivers normally, once installed, work effectively. However, in certain situations some driver optimization may be advantageous to system performance. From inside the CONFIG.SYS file for MS-DOS, use the following format when modifying the device driver switches:

The standard format for command line switches is:

Device = C:\INIASPI\ASPI910U.SYS [Driver Config Option]

Driver config options:

/D	Verbose Mode provides detailed information about driver on
	system command line when driver is initialized.
/L	Driver scan eight LUNs for each SCSI Target.
/Bb,dd	Scan device only on PCI BUS #b, PCI DEVICE #dd
	The range for “b” is from 0 to 7.
	The range for “dd” is from 0 to 20.
/Bb	Scan all the devices on the PCI BUS #b
	The range for “b” is from 0 to 7.
/Sdd	Scan device only on the PCI BUS #0 and device #dd
	The range for “dd” is from 0 to 20.
/CCBSx	Defines the maximum number of concurrent I/O that driver
	supports.
	The range for “x” is from 1 to 16.

5-5