Initio INI-9100UW user manual ∙ Select Initio INI-9100U/9100UW SCSI Host Adapter

Installing a new Windows NT system and Initio driver without floppy disks

For computer systems installing or upgrading to Windows NT from a floppyless setup such as a share on your network, these instructions will guide you through the INI-9100U/9100UW host adapter driver installation. The Windows-NT driver will be found on the INITIO INI-9100U/9100UW DRIVER DISK 1. It is important that the hardware has been installed successfully before proceeding further.

1.Execute a floppyless setup as described by the Windows NT System Administrator’s Guide.

2.When SETUP begins to load, the screen will turn from black to blue with the text “SETUP IS INSPECTING YOUR COMPUTER’S HARDWARE CONFIGURATION…” at the top.

∙Press the F6 key to interrupt this process. You will have two seconds in which to press this key.

∙Follow the instructions on the screen until you are asked to specify a SCSI driver.

3.Insert the INITIO INI-9100U/9100UW DRIVER DISK 1 into your local floppy disk drive, and press <ENTER>.

∙Select: Initio INI-9100U/9100UW SCSI Host Adapter

4.The Initio host adapter driver is now installed

7-9