Initio INI-9100UW user manual Select INITIO INI-9100U/9100UW Host Adapter, select “OK”, then

4.In the INSTALL FROM DISK window that is displayed, enter the Initio Driver path name:

∙Insert INITIO INI-9100U/9100UW DRIVER DISK 1 into drive A:

∙Type: A:\WIN95, select “OK”

5.Select INITIO INI-9100U/9100UW Host Adapter, select “OK”, then

“OK” again to install the INI910U.MPD driver onto your hard disk drive.

6.This completes loading the Host Adapter Driver, follow the on-screen directions to complete the Windows 95 installation. Exit and reboot the system to activate the device driver.

7.It is highly recommended that you verify your Windows 95 device driver has been properly installed by selecting MY COMPUTER from the desktop. Then select CONTROL PANEL:

∙Select SYSTEM from within the CONTROL PANEL group,

∙Select DEVICE MANAGER from within the SYSTEM group,

∙Select SCSI CONTROLLER from within the DEVICE MANAGER listing, and

∙Select INITIO INI-9100U/9100UW SCSI HOST ADAPTER from within the SCSI CONTROLLER listing. If “This device is working properly” is displayed on your screen, the driver has been correctly installed.

6-5