Initio INI-9100UW user manual Novell NetWare Driver Installation, Overview

Novell NetWare Driver Installation

Overview

The Initio INI-9100U/9100UW will support Novell NetWare 386 V4.XX or V3.1X with the addition of a software driver. The installation procedure described here requires some experience in Novell system setup and administration. The device driver is transferred from the INITIO INI- 9100U/9100UW DRIVER DISK 1 to the hard drive where it is automatically initialized during the system boot routine. The device drivers listed can support NetWare versions described after the Initio file name:

\NETWARE\V31X\INI910U.DSK	Initio Novell adapter driver for
	V3.1X
\NETWARE\V31X\ASPITRAN.DSK	ASPI transport layer driver for
	V3.1X
\NETWARE\V4X\INI910U.DSK	Initio Novell adapter driver for
	V4.X or later
\NETWARE\V4X\INI910U.DDI	Device driver installation file
\NETWARE\V4X\ASPITRAN.DSK	ASPI transport layer driver for
	V4.X or later
\NETWARE\HAM\INI9100.HAM	HAM device driver
\NETWARE\HAM\INI9100.DDI	HAM device driver installation file

Reference Documentation:

∙Novell NetWare installation and user’s guide

∙The systems setup and installation guide

∙The documentation for system peripherals

∙Initio documentation for the SCSI host adapter

System Requirement:

∙Installed primary floppy diskette drive.

∙Installed MS-DOS/ASPI driver on resident hard drive.

∙Installed and configured CD-ROM drive (driver provided by Corel).

8-2