Initio INI-9100UW user manual New OS/2 installation

that the selected procedure be read and understood before proceeding. Please read all instructions carefully.

New OS/2 installation:

These instructions will guide you through the Initio OS/2 device driver and OS/2 installation at the same time. The program can be installed from floppy diskettes or from CD-ROM. The OS/2 driver for the INI-9100U/9100UW will be found on the INITIO INI-9100U/9100UW DRIVER INSTALLATION DISK

1.It is important that the INI-9100U/9100UW hardware has been installed successfully before proceeding further.

1.Make a duplicate copy of OS/2 Diskette 1 using a blank diskette and label it as “OS/2 Diskette 1 for INI-9100U/9100UW”.

2.Copy the INI910U.ADD file from the INITIO INI-9100U/9100UW DRIVER DISK 1 (OS/2 subdirectory) to the root directory on the “OS/2 diskette 1 for INI-9100U/9100UW”.

3.Using an appropriate text editor modify the CONFIG.SYS on the OS/2 Diskette 1 for INI-9100U/9100UW to include the new Initio driver (see figure 9-1).

∙ Enter: BASEDEV=INI910U.ADD and save the file.

9-3