Initio INI-9100UW user manual Adding the Initio driver to an existing UnixWare system, 11-6, Enter

Adding the Initio driver to an existing UnixWare system

1.Once a UnixWare session is established and a command prompt is ready, type (recall that UnixWare is case sensitive):

∙cp /stand/unix /stand/unix.org , press <ENTER>

∙pkgadd -d diskette1 , press <ENTER>

2.Select i910u ihv hba from the list of available host drivers, press

<ENTER>.

3.If the INI-9100U/9100UW is intended to be the bootable host adapter, the next step to updating the driver will require a revision to the I910u file. These instructions will guide you through changing the current software settings for UnixWare to establish the INI-9100U/9100UW as the host adapter for your boot device:

∙At the system command prompt, type

∙cd /etc/conf/sdevice.d

∙Use “vi” or another editor to modify the file I910u by adding a line

∙locate the line $version2

∙edit the file by adding the line $static immediately following $version2.

∙Rebuild the UnixWare kernel by completing the following steps at the command prompt :

∙/etc/conf/bin/idbuild -B <ENTER>

∙ cp /etc/conf/cf.d/unix /stand/unix <ENTER>

∙cd / <ENTER>

∙shutdown -g0 ( 0 is Zero ) <ENTER>

∙Y <ENTER>

11-6