Philips bSure 1 InstallationConnecting to a computer, Digital connection, DVI to VGA connection

Models: bSure 1

1 47
Download 47 pages 15.69 Kb
Page 19
Image 19
4.InstallationConnecting to a computer >

XP cClear10 English (good) 24-07-2003 15:52 Pagina 19

4.InstallationConnecting to a computer >

Datata 2

Datata 1 (DVI)( I)

Pr/Cr/ R S-Videoi

Y G CVBS

Pb/Cb/

B

Videoi

Audioio L

Audio

Audio OutVideoi Audioio R

Out

RS-232

PS/2/2

 

 

 

 

 

 

Data Audio

2

1

Data Audio

1

2

USB/USB/

Audioio

2 1b

3

4

PC

PS/2

USB

 

Audio out

Data out(DVI)

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Digital connection

Datata 1 (DVI)( I)

4

5 Digital connectionDVI to VGA connectionManual backgroundManual backgroundManual backgroundManual backgroundManual backgroundManual background

Data out

1Connect the DVI (out) socket of the computer to the Data 1 (DVI) socket of the projector and secure the plugs by tightening the thumb screws.

For this, use the DVI cable supplied (4).

2Connect the USB/USB Audio (upstream) socket of the projector to the USB downstream port of the computer.

For this, use the VGA/USB cable supplied (1b).

or:

2Connect the PS/2 (out) socket of the projector to the PS/2 (in) socket of the computer. For this, use an optional PS/2 cable (2).

You can now manipulate the mouse cursor on the computer and on the screen, using Cursor Control on the remote control. When using the USB connection, make sure Windows 98, Windows ME, Windows 2000 or Windows XP is installed on the computer.

The display settings of the computer will be changed to fit the capability of the projector.

Audio information from the computer will now be heard via the projector speaker (only with bSure2 Brilliance version).

When no USB connection has been made, you can connect the Audio out socket of the computer to the Data 1 Audio socket of the projector.

For this use an optional audio cable (3).

Audio information from the computer will now be heard via the projector speaker.

DVI to VGA connection

If your computer is not equipped with a DVI output:

1Connect the DVI/VGA adaptor (4) supplied to the Data 1 (DVI) socket of the projector.

2Connect the VGA/USB cable supplied (5) to both adaptor and Data out socket of the computer.

3Make the other connections as described above.

When switching on, first switch on the projector and then the PC.

Philips Multimedia Projector

19

English User guide cClear

 

 

 

Page 19
Image 19
Philips bSure 1 manual InstallationConnecting to a computer, Digital connection, DVI to VGA connection