XP cClear10 English (good)
6
AV | Source | Menu | OK |
Mute |
|
|
|
Lamp
Stand
by
Temp
Move window to select the area to be captured. Press OK key to resize the capture window.
Keep OK key pressed for 3 seconds to confirm capture of (new) Custom image.
Press Menu key to return to the menu.
Capture complete.
Please reset projector.
5. Operation | On Screen Display Menu > |
Loading your own personal start-up screen
(for bSure2 Brilliance projectors only)
All settings described under ‘General adjustments/settings’ can be made, following the instructions under ‘On Screen Display Menu - General explanation’. Loading your own personal
1Press Menu.
–The menu bar appears on the screen.
2Use Cursor Control to move the cursor to ‘Settings.’
3Select
4Select ‘Log capture’ if you wish to load the currently shown image and store it as
–The menu bar disappears and the image is shown.
5 Press OK to display the capture window.
The capture window (red oblong) shows you what part of the image will be loaded.
6 With Cursor Control you can move the window to select the part of the image you wish to load.
• Press OK if you wish to resize the capture window in order to make the image fit in the window.You can use Cursor Control to adjust the size of the window.
7 Keep OK pressed for 3 seconds to confirm.
–‘Capturing’ appears on the screen and the image will now be loaded.The loading time is dependent on the size of the image and may take up to a few minutes.
–When the image is loaded ‘Capture complete’ and ‘Please reset projector’ appear on the screen.
8 You will now have to reset the projector. For this see ‘Resetting the projector’ hereafter.
Philips Multimedia Projector | 39 | English User guide cClear |
|
|
|