XP cClear10 English (good)
6
AV | Source | Menu | OK |
Mute |
|
|
|
Lamp
Stand
by
Temp
Note
5. Operation | On Screen Display Menu < |
Restarting the projector
1Press the Standby button twice in succession to switch the projector into the Power/Standby mode.
2Wait until the cooling fan has stopped (about 3 minutes after the projector has been switched to Power/Standby).Then disconnect the mains lead to switch off the mains supply.
3Connect the mains lead again and press the Standby button to switch the projector back into Power/Standby mode.
–The Standby indicator lights up red, the projector is now in the Power/Standby mode.
4 Press any button on projector or remote control to switch on the projector.
–The Standby indicator lights up orange.
–When the projection lamp is on, the Standby indicator lights up green and your personal
Your personal
Philips Multimedia Projector | 40 | English User guide cClear |
|
|
|