XP cClear10 English (good)
General adjustments/settings
6
AV | Source | Menu | OK |
Mute |
|
|
|
Lamp
Stand
by
Temp
5. Operation | On Screen Display Menu > |
The projector is equipped with the following functions to optimize its use and handling:
Settings
•Press Menu and select Settings in the menu bar.The following settings/adjustments can now be made for Computer, Component and
–Language
selects the required menu language;
–Keystone correction
corrects picture distortion of the horizontal and vertical keystone type by internal scaling;
–SmartDimmer
reduces the luminosity of the lamp to eighty percent (if enabled);
–Source
selects the current projection source: Auto, RGB sync,YPbPr, RGB sog,
–System information
The System Information sub menu contains an overview of the most relevant projector settings, including information on the hardware and software configuration;
–Factory settings
resets all user settings to the default factory settings;
–Key lock
–
displays (Default) or suppresses (Off) the default Philips
–Lamp counter
shows the operating time of the lamp, which can be reset after a new lamp has been installed;
–SmartSave
selects the delay time for the projector to switch to Standby;
–Auto Source
switches automatic source selection on or off;
–Feedback
suppresses OSD messages. Warning or error messages however are never suppressed;
Audio adjustments
•Press Menu and select Audio in the menu bar. The following Audio adjustments can now be made for both Computer, Component and
–Volume
adjusts the sound level;
–Bass
adjusts the bass tones;
–Treble
adjusts the high tones;
–Mute
mutes the sound of the projector;
–Audio out
switches between fixed (‘Line’) or variable (‘Regulated’) volume output on the Audio Out socket of the projector.
Note Volume can also be adjusted with the – Volume + keys on the remote control and local keyboard.
Philips Multimedia Projector | 33 | English User guide cClear |
|
|
|