XP cClear10 English (good)
7.Troubleshooting | > |
In Data mode
–Input resolution is too high (and keystoning is applied).
•If you wish to keep the keystone correction, decrease the input resolution until the image is correctly displayed. For this, refer to the User Guide or support information of the computer.
•If you wish to keep the input resolution as it is, decrease keystoning until the image is correctly displayed. For this, use ‘Keystone correction’ option in the ‘Settings’ menu.
–Input resolution is too high (and no keystoning is applied).
•Decrease the input resolution until the image is correctly displayed. For this, refer to the User Guide or support information of the computer.
In case of RGBS (Scart) connection
–RGBS is not selected or Auto Source is activated (does not recognize RGBS).
•Select RGBS as projection source with the Source button on the projector or the remote control.
In case of external monitor connection
–In case of interference problems when connecting to an external monitor, applying long VGA cables or interference with certain monitor type's, the use of an active splitter is recommended
Poor colour • Adjust ‘Brightness’, ‘Contrast’, ‘Saturation’ or ‘Hue’ (see ’Picture adjustment’ under ‘Operation’
- ‘On Screen Display Menu’).
•Reset all projector settings in the ‘Settings’ menu (‘Factory settings’).
Image is blurred
Picture rolls
No sound
–Image is not focused.
• Adjust focus ring.
–Distance between projector and screen is not correct.
•Adjust the distance between the projector and the screen.
–Signal cable is not correctly connected.
• Connect signal cable correctly.
–Signal cable is not correctly connected.
• Connect signal cable correctly.
–Audio cable is not correctly connected.
• Connect audio cable correctly.
–Volume is not adjusted properly.
•Adjust volume.
–
•Cancel
In case of USB connection
–The
•Select USB audio as active audio output on your computer. For this see the User Guide of the computer.
Philips Multimedia Projector | 45 | English User guide cClear |
|
|
|
