Philips bSure 1 manual time, Maintenance, Resetting the lamplife, Press Menu

XP cClear10 English (good) 24-07-2003 15:52 Pagina 43

6. Maintenance <

•Always use the same type of lamp: See ‘Optional accessories’ for the correct type of lamp for your projector.

•Do not touch lamp or point lamp housing opening at anyone.

•Do not drop, as the impact may cause the lamp to break.

8Place the lamp holder in the guiding slots and insert into the lamp compartment.

9 Tighten screw B again.

B

10 Put the lamp door back in place and press tab A back in its original position.

A

–The Mains inlet socket will open again.

11Insert the mains lead into both the projector Mains inlet socket and the wall socket.

12Press the Standby button to switch on the projector.

13Reset the lamp life time (see ‘Resetting the lamplife time’).

14Dispose of the old lamp in special chemical disposal bins.

Resetting the lamplife	1 Press Menu.
time	– The menu bar appears on the screen.

AV	Source	Menu	OK
Mute

Lamp

Stand

by

Temp

6

2Use cursor control to select ‘Settings’ in the menu bar.

3Use cursor control to select ‘Lamp counter’ in the sub menu.

4Press OK for 3 seconds to reset the lamp counter.

5If required, select another item you wish to adjust or press Menu to exit.

Philips Multimedia Projector 43 English User guide cClear