Operating the Display
Shows Current Heading
Steering
ModeSteer to a new Desired Heading
Rudder Angle | Backlit For Easy Night Vision | |||
or Turn Rate |
| Directional Input Dial | ||
Indicator |
| |||
| ||||
Setting your display for accurate heading output:
The heading display displays the current heading of the vessel. The compass must be calibrated and north set for this display to be correct. Please see your Gladiator’s Owner’s Manual for these instructions.
The heading on the display may not match your compass or your GPS. This is normal. Once the Gladiator system’s compass has been calibrated and north has been set, it may be the most accurate heading display on your boat.
LED Backlight Control
There is an LED backlight to be used in low light conditions. The backlight is activated and adjusted by pressing and holding the directional input dial for greater than 4 seconds. The backlight will cycle through six (6) separate intensities while the dial is being held down. Let up on the dial when the desired intensity is reached.
Page 7
