
NOTE: If the PTT key is pressed during scanning (when the display is changing) it will cancel SCAN and stop at the channel last scanned. If a channel is static (being received) you must transmit within 5 seconds after the received broadcast ends before SCAN moves to the next channel. After transmitting, scanning resumes when you release the key. Pressing any other keys will cancel the scan with the exception of the Power, Volume +, Volume
4.To remove a channel from the scan memory, simply access it with the UP/DOWN arrow keys and press the MEM key.
NOTE: Channels entered into memory will be retained when the unit batteries are removed.
Tri-Watch
To use Tri-Watch:
1.First determine which channel other than 16 and 9 that you desire to monitor, then use the UP or DOWN arrow keys to make a choice.
2.Press and hold the
3.Observe the LCD display showing
4.Observe that when a transmission is received by the third channel, reception will be briefly inter- rupted to monitor channels 16 and 9. If reception is on channel 9 it will be interrupted to monitor channel 16. Channel 16 always has priority in TRI-
WATCH.
5.To cancel the
GETTING
STARTED
Tri-Watch
TRI | Press and |
Hold for | |
| More Than |
| 1 Second |
FIGURE 8
19