GarrettCom CSG14 manual Www . GarrettCom . com

CSG14 Series Gigabit Converter Switch Installation and User Guide (05/08)

3.7CSG14H and P Series, DC-powered, -48VDC, 24VDC and 12VDC Installation This section describes the proper connection of the -48VDC leads (or 24VDC,

12VDC leads) to the DC power terminal block on the Magnum CSG14H hardened media converter (as shown in Figure). The DC terminal block on the Magnum CSG14H is located on the left side of the unit and is equipped with three (3) screw-down lead posts. The power terminals are identified as positive (+) and negative (-), and they are floating inside the unit so that the user if desired may

ground either of the terminals. The chassis is “earth” or ground (GND).

www . GarrettCom . com

47