CSG14 Series Gigabit Converter Switch | Installation and User Guide (05/08) |
configuring to be done at installation or for maintenance. The only hardware configuration settings are user options for port #2, to configure it FF/AN. The internal functions of both are described below.
Switching, Filtering and Forwarding
Each time a packet arrives on one of the switched ports, the decision is taken to either filter or to forward the packet. Packets whose source and destination addresses on the same port segment will be filtered, constraining them to one port and relieving the rest of the network from processing them. A packet whose destination address is on another port segment will be forwarded to the appropriate port, and will not be sent to the other ports where it is not needed. Packets needed for maintaining the operation of the network (such as occasional
www . GarrettCom . com
57
