CS14, CSN14 Series Converter Switches | Installation and User Guide (02/06) |
Port Connectors:
Two RJ-45 Ports: support 100BASE-TX and 10BASE-T with auto-cross (MDIX). They are shielded 8-pin female connectors for shielded (STP) and unshielded (UTP) Cat 3, 4, 5 cable.
One Fiber optic port: On the CSN14 Series it is 10Base-FL with ST connections and on the CS14 series it is 100Base-FX with a “fiber flavor” choice of multimode SC, ST or MTRJ or single mode SSC, SSCL, SST or SLC connectors.
Switches
Fiber Port # 1 is controlled by an “F – H” switch, provided underneath it. “F” enables full-duplex mode and “H” enables half-duplex mode.
The default setting is “F” for 100Mb fiber models, “H” for 10Mb fiber models.
www . GarrettCom . com
