IPS42 Internal Power Supply | Installation and User Guide (11/09) |
1.
2.The Alarm Relay contact connected to the two terminals (1, 2) is hardware operated.
3.By default it is NC (normally closed). It will open if there is any loss of power to the electronics inside of the unit.
4.0TROUBLESHOOTING
All Magnum Ethernet products are designed to provide reliability and consistently high performance in all network environments. The installation of Magnum IPS42 Series Internal Power Supply is a straightforward procedure (see INSTALLATION, Section 3.0); the operation is also straightforward and is discussed in the included ES42 User Guide.
Should problems develop during installation or operation, this section is intended to help locate, identify and correct these types of problems. Please follow the suggestions listed below prior to contacting your supplier. However, if you are unsure of the procedures described in this section or if the Magnum IPS42 Series Internal Power Supply is not performing as expected, do not attempt to repair the unit; instead contact your supplier for assistance or contact GarrettCom Customer Support.
www . GarrettCom . com
21
