MAGNUM 6K SWITCHES, MNS-6K USER GUIDE
Syntax period time=<1..10> - sets the duration of relay action for the momentary type signal. This may be needed to adjust to the behavior of the circuit or relay. Default is 3 seconds. Time is in seconds Syntax del event=<event-id|list|range|all> - disables alarm action in response to the specified event ID Syntax alarm <enable|disable> - globally enables or disables the alarm action Syntax show alarm - displays the current status of Alarm system
Magnum6K25# alarm
Magnum6K25(alarm)## add event=2
Alarm Event(s) Added: 2
Magnum6K25(alarm)## add event=1-5
Event 2 is Already Enabled.
Alarm Event(s) Added: 1, 3, 4, 5
Magnum6K25(alarm)## add event=6,8
Alarm Event(s) Added: 6, 8
Magnum6K25(alarm)## add event=all
Event 1 is Already Enabled.
Event 2 is Already Enabled.
Event 3 is Already Enabled.
Event 4 is Already Enabled.
Event 5 is Already Enabled.
Event 6 is Already Enabled.
Event 8 is Already Enabled.
Alarm Event(s) Added: 7, 9, 10, 11, 12
Magnum6K25(alarm)## del event=2
Alarm Event(s) Deleted: 2
Magnum6K25(alarm)## period time=5
Relay closure Time Set.
Magnum6K25(alarm)## show alarm
Alarm Events Configuration
--------------------------
Alarm Status: DISABLED
Relay Closure Time Period: 5 Seconds
EventId Description Mode
1 S-RING OPEN SUSTAINED
2 Cold Start NOT ENABLED
3 Warm Start MOMENTARY
4 Link Up MOMENTARY
5 Link Down MOMENTARY
258