Basic features

• Intel Pentium® II Xeon™ processor (speed depends on the model)•SMP design supporting up to two processor modules•Intel MP Specification V1.1 and 1.4 compliant•32-bit PCI and 16-bit ISA bus master•64-bit processor and memory data path•Extended PCI-to-PCI bridge support

•64-MB error checking and correcting (ECC) memory, expandable to 2-GB using ECC PC100-compliant 100MHz 72-bit SDRAM DIMMs

•Integrated 2-MB DRAM PCI Graphics (Cirrus Logic GD54M30)

•Seven expansion slots: five PCI, one shared PCI/RAIDport, and one shared PCI/ISA

•Integrated PCI Ultra2 SCSI (Adaptec 7890) with two 68-pin connectors, dual-channel ultra-DMA PCI IDE interface, and diskette controller supporting 1.44 MB and 2.88 MB formats.

•RAIDport III ready: the shared PCI/RAIDport slot supports the addition of a RAIDport card to provide RAID capability.

•Low voltage differential (LVD) support for SCSI devices. LVD SCSI allows faster disk access and greater data integrity

•Power supply unit that supports dual 400 W redundant power supply modules with hot swap capability. The system ships with a single module. If you install the optional second module, the power supply supports load sharing and N+1 fault tolerance.

•Phoenix upgradable Flash BIOS, Year 2000 Ready

•

The system is equipped with InforManager™

(IFM), a special

 

feature consisting of both hardware and software designed to

 

monitor and report the operating status of the system and its

 

devices: processors, power supplies, RAM, ambient temperatures,

 

voltages, and fan operation. For further information about the

 

InforManager™ , refer to the InforManager™

User’s Guide.

8 Gateway ALR 8300 User’s Guide