2
Chapter 1: Preparing to Install Your Drive
www.gateway.com
To install a drive, follow these steps:
1Remove drive software (if replacing a Zip or tape drive).
2Remove the existing drive (if replacing a drive).
3Install the new drive.
4Install drive software (if installing a Zip or tape drive).
Preparing your work area

To prepare your work area:

1Find a place that:
■Is clean. (Avoid dusty areas.)
■Is a low-static environment. (Avoid carpeted areas.)
■Has a stable platform on which to set your computer.
■Is near a telephone in case you need help from Gateway Technical
Support. The telephone must be directly connected to a telephone jack
and cannot be connected to your computer.
2Obtain these additional items:
■A Phillips screwdriver.
■A grounding wrist strap (available at most electronic stores).
■A small container to hold hardware parts, such as screws, while you
are working.
■The documentation that came with your computer.
Important If you do not have printed documentation, go to the
Gateway Web site (support.gat eway.com) and print the
appropriate document before starting the installation
procedure.