Main
Page
Contents
1 Preparing to Install Your Drive
2 Removing an Existing Drive
3 Installing a New Drive
4 Troubleshooting
Page
Preparing to Install Y our Drive
1 2 3 4
Preparing your work area
To prepare your work area:
1
2
Preventing static electricity discharge
Page
Page
Removing drive software
To remove the drive software:
1
2
3
Page
Removing the drive
To remove the existing drive:
1
2
3
Page
Page
Page
Page
Page
14
Identifying connectors
CD, DVD, diskette, tape, and Zip drives
15
Flash memory drives
Configuring the new IDE drive
Master drives
Slave drives
Setting the IDE jumpers
To set the jumpers for an IDE drive:
1
2
3
Configuring the new SCSI drive
Termination
SCSI IDs
Setting the SCSI jumpers
To set the jumpers for a SCSI drive:
1
2 3
4
5
Installing a drive
To install a drive:
1
2 3
4
Page
Page
10
Configuring the BIOS
To configure the BIOS:
1
2
3
5
6
7
8
9 10
Installing Zip drive software
Installing Seagate tape drive software
Page
Troubleshooting
General troubleshooting guidelines
35
CD or DVD drive
Your computer does not recognize the CD or D VD drive.
The CD or DVD drive makes a buzzing noise.
36
Audio CD does not produce sound.
A DVD movie will not play.
37
Diskette drive
Your computer cannot access the diskette drive.
Your computer cannot access the diskette.
To format a diskette:
1 2
3
Your computer does not recognize the diskette drive.
To check the diskette drive identification in the BIOS Setup utility:
1
2
3
Page
40
The diskette drive light stays on continuously.
To fix the data cable connection:
1 2 3 4 5
6
41
Diskette drive error messages
Diskette Drive 0 Failure or Diskette Drive 1 Failure
Not ready reading driveA or Not ready reading drive B
Invalid drive specification
Invalid media type
Flash memory drive
43
Cannot copy songs from a Secure Digital memory card to my computer.
Zip drive
The green busy light on the Zip drive does not turn on.
The Zip drive is not assigned a drive letter, or th e Iomega software cannot find the Zip drive.
44
To determine if the operating system is running in 32-bit mode:
1 2
3
45
Tape drive
After a period of successful operation, the tape drive appears to fail during a backup or restore.
Re-tensioning a backup tape.
46
Cleaning a tape drive.
1
2
3
Your computer does not recognize your new IDE tape drive.
47
Your computer does not recognize your new SCSI tape drive or other SCSI devices:
Page
A
Appendix A: Safety, Regulatory, and Legal Information
www.gateway.com
Canada
Industry Canada (IC) Unintentional emitter per ICES-003
Regulatory compliance statements
Laser safety statement
California Proposition 65 Warning
Appendix A: Safety, Regulatory, and Legal Information
www.gateway.com
Notices
All Rights Reserved
Trademark Acknowledgments
