Gateway DC-M40 Starting SETUP mode

ADVANCED
63
SETTING UP THE CAMERA SYSTEM
Starting SETUP mode
• Rotate the mode dial to SETUP mode, to set up the basic camera settings.
FORMAT
• This is used for formatting the CF CARD.
1.Rotate the mode dial to the SETUP mode. A MENU will
display on the LCD monitor.
2.Press the UP ( ) / DOWN ( ) button and select
[FORMAT].
3.Press the RIGHT( ) button to select the [FORMAT]
sub menu.
4. Press the RIGHT ( ) button to select the [FORMAT]
sub menu.
5.Select the desired setting by pressing the UP ( ) /
DOWN ( )button.
After selecting the desired setting, press the OK
button to confirm the setting.
6.Selecting [NO]: The menu display returns to the
initial display.
Select[YES]: The [ARE YOU SURE?] message
will display. Selecting [NO]
makes the menu display return
to the initial display. If you
select [YES], the [WAITING] mes
sage will display and the CD CARD
is formatted.
Note
• All the files in the CF CARD are deleted by the [FORMAT] function.
Before formatting the CF CARD, it is advisable to copy important data onto
other media as back-up,such as. floppy disks, hard disks, or CDs.