30
CHECKING THE BATTERY POWER
When the batteries are installed in the camera, the camera checks the battery power automatically
and shows the result on the data panel.
Lights - Prepare new batteries. Even in this status, the recording
or playback can be performed.
All indicators go out, blinks for 5 seconds and then, all indicators go out again.
• Replace all batteries with new ones.
Taking a picture or playing back cannot be excuted.
lights - The battery power is sufficient.
* When nothing is displayed on the data panel, make sure that the batteries are installed with a
correct polarity (+/-). When nothing is displayed even though the batteries are installed correctly,
replace the batteries with new ones.