103
Adding or replacing add-in cards
www.gateway.com
Adding or replacing add-in cards
An add-in card is a card used in the computer to add functionality to the system.
Use the following instructions to replace, add, or reseat an add-in card.
To replace, add, or reseat an add-in card:
1Open the case by following the instructions in “Opening the case” on
page 92.
2For more stability, place your computer on its side. To avoid scratching
the case, place it on a towel or other non-abrasive surface.
3Disconnect any cables that are attached to the card, noting their locations
and orientation. (You will reconnect the cables after you install the new
card.) See the add-in card documentation for further instructions.
Retention thumbscrew