90
Chapter 7: Adding or Replacing Components
www.gateway.com
Selecting a place to work
Work on your computer in an area that:
■Is clean (avoid dusty areas)
■Is a low-static environment (avoid carpeted areas)
■Has a stable surface on which to set your computer
■Has enough room to place all of your computer parts
■Is near a grounded outlet so you can test your computer after installation
■Is near a telephone (in case you need help from Gateway Technical
Support). The telephone must be directly connected to a telephone jack
and cannot be connected to your computer
Gathering the tools you need
Some tools and supplies that you m ay need to work on your computer are:
■A flat-head screwdriver
■A Phillips screwdriver
■A notebook to take notes
■Small containers to store various types of screws
■A grounding wrist strap (available at most electronic stores)
Tips & Tricks When cleaning the case, do not use abrasive or solvent
cleaners because they can damage the finish. Use soap
and water or a dilution of 80% water and 20% isopropyl
alcohol. For more information, see “Cleaning your
computer” on page67.