CHAPTER 1: Using Your Gateway Flat-Panel Monitor

Troubleshooting

Important

Make sure that the monitor has warmed up for approximately 30 minutes before making any judgments about the picture quality.

If you have problems with the monitor, the information in this troubleshooting section may help you solve them.

No power

Make sure that the power cord is connected correctly to both the back of the monitor and the wall outlet. For more information about connecting the power cord, see “Connecting the monitor” on page 2.

No picture

Press (Menu), then (Source) to make sure that you have selected the correct video source.

Make sure that the power cord is connected correctly to both the back of the monitor and the wall outlet. For more information about connecting the power cord, see “Connecting the monitor” on page 2.

Make sure that the video cable is connected securely to the back of the monitor and computer. For more information about connecting the video cable, see “Connecting the monitor” on page 2.

Make sure that the monitor is turned on.

If the power LED is orange:

Make sure that your computer is turned on.

Move the mouse or press any key on the keyboard to bring the monitor out of sleep mode.

Restart your computer with the monitor turned on.

Make sure that the video cable is not damaged.

Check the end of the video cable for any pins that might be bent or pushed in.

Turn off the monitor and unplug the video cable from the back of your computer. Turn the monitor back on and wait for ten seconds. If the monitor is functioning correctly, a “No Signal” message appears. For more information about connecting the video cable, see “Connecting the monitor” on page 2.

Display colors are wrong

Press (Menu), then (Auto) to automatically adjust the display image to the ideal settings.

Restart your computer with the monitor turned on.

Make sure that the video cable is connected securely to the back of the monitor and your computer. For more information about connecting the video cable, see “Connecting the monitor” on page 2.

Make sure that the video cable is not damaged.

Check the end of the video cable for any pins that might be bent or pushed in.

14

Page 18
Image 18
Gateway FHD2102 manual Troubleshooting, No power, No picture, Display colors are wrong