Gateway FHD2102 manual Important safety information, Setting up your system

Models: FHD2102

1 28
Download 28 pages 45.31 Kb
Page 24
Image 24

APPENDIX A: Safety, Regulatory, and Legal Information

Important safety information

Warning

Always follow these instructions to help guard against personal injury and damage to your Gateway product.

Warning

Do not use Gateway products in areas classified as hazardous locations. Such areas include patient care areas of medical and dental facilities, oxygen-laden environments, or industrial facilities.

Your Gateway product is designed and tested to meet the latest standards for safety of information technology equipment. However, to ensure safe use of this product, it is important that the safety instructions marked on the product and in the documentation are followed.

Setting up your system

nRead and follow all instructions marked on the product and in the documentation before you operate your system. Retain all safety and operating instructions for future use.

nDo not use this product near water or a heat source such as a radiator.

nSet up the system on a stable work surface.

nThe product should only be operated from the type of power source indicated on the rating label.

nIf your product has a voltage selector switch, make sure that the switch is in the proper position for your area. The voltage selector switch is set at the factory to the correct voltage.

nOpenings in the monitor case are provided for ventilation. Do not block or cover these openings. Make sure you provide adequate space, at least 6 inches (15 cm), around the system for ventilation when you set up your work area. Never insert objects of any kind into the monitor ventilation openings.

nSome products are equipped with a three-wire power cord to make sure that the product is properly grounded when in use. The plug on this cord will only fit into a grounding-type outlet. This is a safety feature. If you are unable to insert the plug into an outlet, contact an electrician to install the appropriate outlet.

nIf you use an extension cord with this system, make sure that the total ampere rating on the products plugged into the extension cord does not exceed the extension cord ampere rating.

nIf your system is fitted with a TV Tuner, cable, or satellite receiver card, make sure that the antenna or cable system is electrically grounded to provide some protection against voltage surges and buildup of static charges.

Care during use

Warning

To prevent electric shock, never remove the cover. No user serviceable parts inside. Refer servicing to qualified service personnel.

nDo not walk on the power cord or allow anything to rest on it.

nDo not spill anything on the system. The best way to avoid spills is to avoid eating and drinking near your system.

nDo not expose the monitor to rain or use near water. If the monitor does get exposed to moisture, unplug it and allow it to dry for 24 hours. Call Gateway Customer Care for advice on whether the monitor is safe to turn back on.

nWhen the monitor is turned off, a small amount of electrical current still flows through the monitor. To avoid electrical shock, always unplug all power cables and modem cables from the wall outlets before cleaning the system.

nUnplug the system from the wall outlet and refer servicing to qualified personnel if:

nThe power cord or plug is damaged.

nLiquid has been spilled into the system.

nThe system does not operate properly when the operating instructions are followed.

nThe system was dropped or the cabinet is damaged. n The system performance changes.

Replacement parts and accessories

Use only replacement parts and accessories recommended by Gateway.

20

Page 24
Image 24
Gateway FHD2102 manual Important safety information, Setting up your system