www.gateway.com | Installing and configuring Microsoft Fax |
Important
The first time you run the Fax Configuration Wizard, you may need to provide information in the Location Information and the Phone and Modem Options dialog boxes.
Before you send your first fax, you need to set up your user information. Your fax cover sheets and fax headers contain this information, some of which is required by law. The Fax Configuration Wizard opens the first time you try to send a fax.
To configure Microsoft Fax:1Click Start, All Programs, Accessories, Communications, Fax, then click Fax Console. The Fax Configuration Wizard opens.
2On the Welcome to Fax Configuration Wizard screen, click Next. The Sender Information screen opens.
3Type the information about yourself that you want to appear on your fax cover page, then click Next. The Select Device for Sending or Receiving Faxes screen opens.
4Click the arrow to open the Please select the fax device list, then click the modem you are using to send and receive faxes.
5If you want the modem to automatically answer the telephone in order to receive faxes, click the Enable Receive check box.
6Click Next. The Transmitting Subscriber Identification (TSID) screen opens.
37