249
Updating device drivers
www.gateway.com
Updating device drivers
The Restoration CDs contain a device driver update utility that works over the
Internet. If you do not have an Internet service provider, the update utility
works by direct-dialing the device driver update service.

To update device drivers:

1Insert the red Drivers and Applications CD into the CD or DVD drive. If the
program starts automatically, go to Step5.
- OR -
If the program does not start automatically, go to Step2.
2Click Start, then click Run. The Run dialog box opens.
3In the Open text box, type d:\runmenu.exe (where d is the drive letter of
the CD or DVD drive).
4Click OK.
5If this is the first time you have inserted the red Drivers and Applications
CD, accept the End User License Agreement (EULA) by clicking Yes, I accept
it, then clicking Continue. The Gateway Driver and Application Recovery
program starts and the Drivers and Application Recovery tab appears.
Important If your notebook came equipped with a wireless device,
only use the drivers approved for the country the device
will be used in. See the red Drivers and ApplicationsCD
or the Gateway Technical Support Web site
(support.gateway.com).
If your notebook came equipped with an internal
embedded wireless device, see “Safety, Regulatory, and
Legal Information” on page307 for general wireless
regulatory and safety guidelines.To find out if your
notebook has an internal wireless device, check the label
(see “Identifying your model” on page12).
Important If the drive you want to use is not in the modular bay, you
need to swap modules. For more information about
swapping modules, see “Changing modules” on page105.