39
Connecting to a wired Ethernet network
www.gateway.com
Connecting to a wired Ethernet network
Your notebook has a network jack that you can use to connect to a 10/10 0/1000
(gigabit) wired Ethernet network.

To connect to a wired Ethernet network:

1Insert one end of the network cable into the network jack on the back
of your notebook.
2Insert the other end of the network cable into a network jack. Ask your
network administrator to help you select the correct network jack.
Important Your notebook may be equipped with a built-in wireless
Ethernet emitter or you may have a wireless Ethernet
PCCard. For information about connecting to a wired or
wireless Ethernet network, see “Networking Your
GatewayM675” on page 205. For information about
installing a wireless Ethernet PCCard, see “Adding and
removing a PCCard” on page 256.