Gateway NB304N manual Security, Outgoing IP Filtering

Security

IP Filtering

The router supports IP Filtering which allows you to easily set up rules to control incoming and outgoing Internet traffic. The router provides two types of IP filtering: Outgoing IP Filtering and Incoming IP Filtering.

Outgoing IP Filtering

By default, the router allows all outgoing Internet traffic from the LAN but by setting up Outgoing IP Filtering rules, you can block some users and/or applications from accessing the Internet.

To delete the rule, click Remove checkbox next to the selected rule and click Remove.

To create a new outgoing IP filter, click Add. The Add IP Filter-Outgoing page will be displayed.

Enter the following parameters:

PARAMETER	DEFINITION
Filter Name	Enter a name to identify the filtering rule
IP Version	Select the IP version to apply the filter to.
Protocol	Select the protocol type to block
Source IP Address/Subnet Mask	Enter the IP Address of the PC on the LAN to block
Source Port	Enter the port number used by the application to block
Destination IP Address/Subnet Mask	Enter the IP Address of the Remote Server to which connections should be blocked
Destination Port	Enter the destination port number used by the application to block

Click Save/Apply to take effect the settings. The new rule will then be displayed in the Outgoing IP Filtering table list.

NetComm NB304N – ADSL2+ Wireless N300 Modem	YML304X
29	www.netcomm.com.au