CHAPTER 2
2.4.1 Basic Installation Procedure
zConnect the LAN: You can connect the Gateway to your PC, a hub, or a switch. Run the Ethernet cable from one of the LAN ports on the rear of the Gateway to your comput- er's network adapter or to another network device. You can also connect the Gateway to your PC or to a client adapter via radio signals. Position both antennas on the back of the Gateway into the desired positions.
zConnect the WAN: Prepare an Ethernet cable for connect- ing the Gateway to a Cable/xDSL modem or Ethernet router. Prepare a serial cable for connecting the Gateway to an ISDN TA or PSTN modem.
zConnect your printer: Use standard parallel printer cable to connect your printer to the printer port on the Gateway.
zPower on: Connect the power adapter to the Gateway.
