How To Assemble
CAUTION: Assemble the cleaner completely before plugging into an electrical outlet.
CAUTION: Moving parts, stay clear of brush roll when plugging in.
NOTE: Features may vary by model yet all parts assemble the same.
Step A Remove Dust Cup
Dust
Cup
Latch
Dust Cup
Handle
Two Screw Locations
Step B Attach Handle
Handle
Tabs
Slots
Screw | Screw |
Dust Cup
1.Remove dust cup from unit to expose the two screw installation locations. Release the dust cup by rotating the dust cup latch to the left. Pull out and up on the dust cup handle to remove from unit.
2.Position handle as above. Slide the handle down over the top of the unit, inserting handle tabs into slots on unit.
3.Find the two screws in the accessory bag included in the carton. To secure the handle on the unit, install the two screws.
4
