60 MULTILINK ETHERNET COMMUNICATIONS SWITCH – QUICKSTART GUIDE
QUICKSTART GUIDE
ZClick on the Send button.
The file will start to load as shown below.
ZOnce the file transfer is complete, reboot the switch using the
Reboot command, or by switching the power off then on.
ML800/1200/1600/2400# reboot
Proceed on rebooting the switch? [Y or N] Y
Rebooting now...
ZLogin to the switch and use the show version command to verify
the version.
ML800/1200/1600/2400# show version
ZIf necessary, upload the configuration file using the following
commands.
ZEnter the xmodem command as shown below: