QUICKSTART GUIDE
MULTILINK ETHERNET COMMUNICATIONS SWITCH – QUICKSTART GUIDE 63
As the file is being loaded, you will see the file transfer in progress window.
ZOnce the transfer is complete, the switch needs to be restarted.
After reboot, the new version of the Multilink firmware is ready for use.
10.4.2 Using TFTP
It is always a good idea to save the configuration before an upgrade. GE Multilin
recommends a two-step update: first save the configuration to the ftp server, then load
the new image and restart the switch.
ZLoad the new firmware as shown below.
FTP is located under Configuration > File Mgmnt > TFTP, if the current firmware is older
than 1.7.3.