Instructions

Using the dishwasher.

SmartDispenseTM Detergent Dispenser (on some models)

Safety

Operating Instructions

Troubleshooting Tips

Consumer Support

This dishwasher may have a SmartDispense™ feature which automatically dispenses liquid automatic dishwasher detergent into each cycle based on soil level and water hardness.

To utilize the SmartDispense™ Detergent Dispenser, it must first be filled. Although any liquid or gel automatic dishwashing detergent can be used in the SmartDispense™ system, all liquid or gel automatic dishwashing detergents are not the same. Most automatic dishwashing detergents are chlorine bleach-based (such as Cascade® or Electrasol®) while others contain enzymes (such as Cascade Complete® or Electrasol® Advanced™ Gel).

Do not mix any chlorine bleach-based automatic dishwashing detergent with any dishwashing detergent containing enzymes as this could cause the detergents to congeal and lead to blockage of the SmartDispense™ system. Check the detergent label to determine if the detergent is chlorine bleach-based or one that contains enzymes. It is recommended that the same type of detergent be used when refilling your SmartDispense™ system.

CAUTION!Absolutely do not add powder detergent, tablets or any liquid soap or detergent normally used for washing hands or dishes in a sink. Only use liquid or gel detergent specifically designed for use in an automatic dishwasher.

Filling Dispenser

To open the dispenser for filling, push down and turn the blue cap counterclockwise until the cap is loose. Lift cap off.

8

Set the door at a comfortable angle to fill the dispenser.

Aim the detergent bottle at the opening in the door and begin to fill.

The dispenser will hold 40 oz of liquid dishwasher detergent (standard size bottle).

Turn clockwise until tight .

When full, replace the cap and turn clockwise until tight to ensure that no water enters the SmartDispense™ dispenser. If residue is left on the door, it will be washed off in the next cycle.

An indicator light will turn on to notify you when the dispenser needs to be filled again. After filling, the light will not turn off until the door is closed. A full dispenser will last approximately 1 month for the average user.

Light will turn on when it is time to refill.

NOTE: If you are not using SmartDispense™ and you want to turn the LOW DETERGENT LEDlight off, press the ADDED HEATpad 5 times within 3 seconds. You will hear 3 beeps, then the light will go off. You can turn the light back on by pressing the ADDED HEAT pad 5 times within 3 seconds.

Page 7 Page 9
Page 8
Image 8
GE 165D4700P382 owner manual SmartDispenseTM Detergent Dispenser on some models, Filling Dispenser
Page 7 Page 9

165D4700P382 specifications

The GE 165D4700P382 is a highly regarded component within the realm of industrial and commercial applications, known for its robustness and reliability. This device serves as a vital part of various electrical systems, providing efficient performance and superior operation in challenging environments.

One of the main features of the GE 165D4700P382 is its advanced protection capabilities. It is designed to safeguard equipment from overloads, short circuits, and voltage spikes, thereby prolonging the life of connected machinery and reducing the likelihood of failures. This protective functionality is essential in environments where electrical disturbances can lead to significant downtime and costly repairs.

The GE 165D4700P382 incorporates cutting-edge technology that enhances its efficiency and versatility. This component is equipped with state-of-the-art microprocessor-based controls that allow for precise monitoring and management of the electrical system. These controls enable functionalities such as adjustable trip settings, remote monitoring, and integration into automated systems, making it an adaptable choice for contemporary industrial settings.

Another key characteristic of the GE 165D4700P382 is its robust construction. Built to withstand extreme temperatures and harsh environmental conditions, this component is rated for high performance even in the most demanding applications. Its housing is designed to resist dust, moisture, and other contaminants, ensuring reliable operation without the need for frequent maintenance.

The device's compact design facilitates easy integration into existing electrical systems, making installation straightforward and efficient. Furthermore, the GE 165D4700P382 offers various mounting options, allowing for flexibility in deployment depending on the specific requirements of the application.

In summary, the GE 165D4700P382 stands out due to its advanced protection features, high-performance microprocessor technology, robust construction, and user-friendly design. These characteristics make it an indispensable asset in industrial and commercial settings, ensuring optimal performance and reliability in electrical systems. As industries continue to evolve with increasing demands for efficiency and safety, the GE 165D4700P382 remains a trusted choice for professionals seeking quality and innovation in their electrical components.
Top Page Image Contents