Consumer Support Troubleshooting, Preparing to Move

Care and cleaning of the refrigerator.

Behind the Refrigerator

Be careful when moving the refrigerator away from the wall. All types of floor coverings can be damaged, particularly cushioned coverings and those with embossed surfaces.

Turn the leveling legs at each front corner of the refrigerator counterclockwise until the rollers support the refrigerator. Pull the refrigerator straight out and return it to position by pushing it straight in. Moving the refrigerator in a side direction may result in damage to the floor covering or refrigerator.

When pushing the refrigerator back, make sure you don’t roll over the power cord or icemaker supply line (on some models).

After rolling the refrigerator back into place, turn the legs clockwise until the legs again bear the weight of the refrigerator.

Light Bulb Replacement

To replace a burned-out bulb, unplug	Turning the control to the 0 position does not
the refrigerator from its electrical outlet,	remove power to the light circuit.
unscrew the bulb when cool and replace
it with an appliance bulb of the same or
lower wattage.

Tips Installation Instructions Operating Instructions Safety Instructions

Preparing for Vacation

For long vacations or absences, remove food and unplug the refrigerator. Move the temperature control dial to the 0 position, and clean the interior with a baking soda solution of one tablespoon (15 ml) of baking soda to one quart (1 liter) of water. Leave the doors open.

Set the icemaker power switch to the

O (off) position or move the feeler arm to the STOP (up) position (depending on model) and shut off the water supply to the refrigerator.

If the temperature can drop below freezing, have a qualified servicer drain the water supply system (on some models) to prevent serious property damage due to flooding.

Consumer Support Troubleshooting

Preparing to Move

Secure all loose items such as grille,	Be sure the refrigerator stays in an upright
shelves and drawers by taping them	position during moving.
securely in place to prevent damage.

16, 17, 18 specifications

GE, or General Electric, has long been a pioneer in the realm of scientific and technological advancement, especially in the sectors of power generation and aviation. Among its notable innovations are the GE 16, 17, and 18 series turbines, which showcase the company's commitment to efficiency, reliability, and performance.

The GE 16 series turbine represents a significant leap in gas turbine technology, designed specifically for the needs of combined cycle power plants. It incorporates advanced combustion technologies that enhance fuel efficiency while minimizing emissions. One of the stand-out features of the GE 16 is its advanced materials that can withstand higher temperatures, allowing for increased operational flexibility and efficiency. This turbine is also equipped with sophisticated digital control systems, enabling operators to optimize performance in real-time, ensuring that the power output is maximized.

With the GE 17 series, GE further raised the bar with notable enhancements in both performance and sustainability. The 17 series is targeted toward the renewable energy transition, designed for greater adaptability to fluctuating energy demands tied to wind and solar power. Key features include the integration of hybrid systems that enable fuel flexibility, allowing operators to switch between natural gas and other fuels based on availability and cost. The GE 17 series also employs advanced aerodynamic designs that reduce drag and improve overall efficiency, making it one of the preferred choices for modern power plants.

The GE 18 series showcases a culmination of GE’s research and development efforts, focusing heavily on digital innovation. This series takes advantage of the Industrial Internet of Things (IIoT) to provide predictive maintenance capabilities, which can significantly reduce downtime and increase operational efficiency. The GE 18 is built with an emphasis on modularity, allowing for easier upgrades and maintenance. This series also stands out for its exceptional operational reliability, ensuring that energy providers can meet consumer demands without interruption.

In summary, the GE 16, 17, and 18 turbines reflect GE's dedication to evolving energy technologies. Each series brings unique features and innovations to the table, ensuring efficiency, flexibility, and sustainability in power generation. Through continuous investment in research and development, GE remains at the forefront of the energy sector, helping integrate traditional and renewable energy sources to meet the world’s growing power needs.

GE 16, 17, 18 Consumer Support Troubleshooting, Behind the Refrigerator, Preparing for Vacation

Models: 16, 17, 18