About the automatic icemaker, Instructions

Instructions

About the automatic icemaker.

A newly-installed refrigerator may take 12 to 24 hours to begin making ice.

Installation Instructions Operating Instructions Safety

Power

SwitchIcemaker

Green	Feeler Arm
Power Light

Power switch model

Feeler Arm in the STOP

Feeler Arm in (up) position the ON (down)

position

Feeler arm model

Automatic Icemaker (on some models)

The icemaker will produce approximately 100–130 cubes in a 24-hour period, depending on the freezer compartment temperature, room temperature, number of door openings and other use conditions.

There are two types of icemakers: power switch models and feeler arm models.

If the refrigerator is operated before the water connection is made to the icemaker, set the power switch to O (off) or move the feeler arm to the STOP (up) position.

When the refrigerator has been connected to the water supply, set the power switch to the I (on) position or move the feeler arm to the ON (down) position. On power switch models, the green light will come on.

You will hear a buzzing sound each time the icemaker fills with water.

The icemaker will fill with water when it cools to 15°F. A newly-installed refrigerator may take 12 to 24 hours to begin making ice cubes.

Throw away the first few batches of ice to allow the water line to clear.

Be sure nothing interferes with the sweep of the feeler arm.

When the bin fills to the level of the feeler arm, the icemaker will stop producing ice.

It is normal for several cubes to be joined together.

If ice is not used frequently, old ice cubes will become cloudy, taste stale and shrink.

On power switch models, the green power light will blink if ice cubes get stuck in the icemaker. To correct this, set the power switch to O (off) and remove the cubes. Set the power switch to I (on) to restart the icemaker. After the icemaker has been turned on again, there will be a delay of about 45 minutes before the icemaker resumes operation.

NOTE: In homes with lower-than-average water pressure, you may hear the icemaker cycle multiple times when making one batch of ice.

Consumer Support Troubleshooting Tips

Icemaker Accessory Kit

If your refrigerator did not already come	Check the back of the refrigerator for
equipped with an automatic icemaker,	the specific icemaker kit needed for your
an icemaker accessory kit is available at	model.
extra cost.

16, 17, 18 specifications

GE, or General Electric, has long been a pioneer in the realm of scientific and technological advancement, especially in the sectors of power generation and aviation. Among its notable innovations are the GE 16, 17, and 18 series turbines, which showcase the company's commitment to efficiency, reliability, and performance.

The GE 16 series turbine represents a significant leap in gas turbine technology, designed specifically for the needs of combined cycle power plants. It incorporates advanced combustion technologies that enhance fuel efficiency while minimizing emissions. One of the stand-out features of the GE 16 is its advanced materials that can withstand higher temperatures, allowing for increased operational flexibility and efficiency. This turbine is also equipped with sophisticated digital control systems, enabling operators to optimize performance in real-time, ensuring that the power output is maximized.

With the GE 17 series, GE further raised the bar with notable enhancements in both performance and sustainability. The 17 series is targeted toward the renewable energy transition, designed for greater adaptability to fluctuating energy demands tied to wind and solar power. Key features include the integration of hybrid systems that enable fuel flexibility, allowing operators to switch between natural gas and other fuels based on availability and cost. The GE 17 series also employs advanced aerodynamic designs that reduce drag and improve overall efficiency, making it one of the preferred choices for modern power plants.

The GE 18 series showcases a culmination of GE’s research and development efforts, focusing heavily on digital innovation. This series takes advantage of the Industrial Internet of Things (IIoT) to provide predictive maintenance capabilities, which can significantly reduce downtime and increase operational efficiency. The GE 18 is built with an emphasis on modularity, allowing for easier upgrades and maintenance. This series also stands out for its exceptional operational reliability, ensuring that energy providers can meet consumer demands without interruption.

In summary, the GE 16, 17, and 18 turbines reflect GE's dedication to evolving energy technologies. Each series brings unique features and innovations to the table, ensuring efficiency, flexibility, and sustainability in power generation. Through continuous investment in research and development, GE remains at the forefront of the energy sector, helping integrate traditional and renewable energy sources to meet the world’s growing power needs.

GE 16, 17, 18 About the automatic icemaker, Instructions, Consumer Support Troubleshooting Tips

Models: 16, 17, 18