Care and cleaning of the refrigerator.

Cleaning the Outside

Safety

The door handles and trim (on some models). Clean with a cloth dampened with soapy water. Dry with a soft cloth.

Keep the outside clean. Wipe with a clean cloth lightly dampened with kitchen appliance wax or mild liquid dish detergent. Dry and polish with a clean, soft cloth.

The stainless steel panels and door handles (on some models) can be cleaned with a commercially available stainless steel cleaner. Do not use appliance wax or polish on the stainless steel.

Do not wipe the refrigerator with a soiled dish cloth or wet towel. These may leave a residue that can erode the paint. Do not use scouring pads, powdered cleaners, bleach or cleaners containing bleach because these products can scratch and weaken the paint finish.

Instructions Operating

Cleaning the Inside

To help prevent odors, leave an open box of baking soda in the fresh food and freezer compartments.

Unplug the refrigerator before cleaning. If this is not practical, wring excess moisture out of sponge or cloth when cleaning around switches, lights or controls.

Use warm water and baking soda solution– about a tablespoon (15 ml) of baking soda to a quart (1 liter) of water. This both cleans and neutralizes odors. Rinse and wipe dry.

After cleaning the door gaskets, apply a thin layer of petroleum jelly to the door gaskets at the hinge side. This helps keep the gaskets from sticking and bending out of shape.

Avoid cleaning cold glass shelves (on some models) with hot water because the extreme temperature difference may cause them to break. Handle glass shelves carefully. Bumping tempered glass can cause it to shatter.

Do not wash any plastic refrigerator parts in the dishwasher.

Instructions Installation Instructions Troubleshooting

Cleaning the condenser coils.

Condenser

There is no need for routine condenser cleaning in normal home operating environments. However, in environments that may be particularly dusty or greasy, the condenser should be cleaned periodically for efficient refrigerator operation.

To clean the condenser, turn the temperature control dial to 0. Sweep away or vacuum up dust.

For best results, use a brush specially designed for this purpose. It is available at most appliance parts stores.

Tips Consumer Support

9

Page 9
Image 9
GE 16, 17, 18 operating instructions Care and cleaning of the refrigerator, Instructions Operating, Tips Consumer Support

16, 17, 18 specifications

GE, or General Electric, has long been a pioneer in the realm of scientific and technological advancement, especially in the sectors of power generation and aviation. Among its notable innovations are the GE 16, 17, and 18 series turbines, which showcase the company's commitment to efficiency, reliability, and performance.

The GE 16 series turbine represents a significant leap in gas turbine technology, designed specifically for the needs of combined cycle power plants. It incorporates advanced combustion technologies that enhance fuel efficiency while minimizing emissions. One of the stand-out features of the GE 16 is its advanced materials that can withstand higher temperatures, allowing for increased operational flexibility and efficiency. This turbine is also equipped with sophisticated digital control systems, enabling operators to optimize performance in real-time, ensuring that the power output is maximized.

With the GE 17 series, GE further raised the bar with notable enhancements in both performance and sustainability. The 17 series is targeted toward the renewable energy transition, designed for greater adaptability to fluctuating energy demands tied to wind and solar power. Key features include the integration of hybrid systems that enable fuel flexibility, allowing operators to switch between natural gas and other fuels based on availability and cost. The GE 17 series also employs advanced aerodynamic designs that reduce drag and improve overall efficiency, making it one of the preferred choices for modern power plants.

The GE 18 series showcases a culmination of GE’s research and development efforts, focusing heavily on digital innovation. This series takes advantage of the Industrial Internet of Things (IIoT) to provide predictive maintenance capabilities, which can significantly reduce downtime and increase operational efficiency. The GE 18 is built with an emphasis on modularity, allowing for easier upgrades and maintenance. This series also stands out for its exceptional operational reliability, ensuring that energy providers can meet consumer demands without interruption.

In summary, the GE 16, 17, and 18 turbines reflect GE's dedication to evolving energy technologies. Each series brings unique features and innovations to the table, ensuring efficiency, flexibility, and sustainability in power generation. Through continuous investment in research and development, GE remains at the forefront of the energy sector, helping integrate traditional and renewable energy sources to meet the world’s growing power needs.