About storage drawer and cover removal.

Not all features are on all models.

Adjustable Humidity Drawer (on some models)

Slide the control all the way to the

Slide the control all the way to the LOW

HIGH setting to provide high humidity

setting to provide lower humidity levels

recommended for most vegetables.

recommended for most fruits.

Drawer and Cover Removal

Drawers can be removed easily by grasping the sides and lifting up slightly while pulling drawers past the stop location.

Full-Width Drawer with Plastic Cover

To remove the cover, lift it off its supports, pull it forward, tilt it and take it out.

Safety Instructions Operating Instructions Installation

Twin Drawers with Glass Cover

To remove:

1 Remove the drawers.

2 Reach in, push the front of glass cover up, and at the same time, pull it forward as far as it will come.

Tilt it and take it out. Avoid cleaning the cold glass cover with hot water because the extreme temperature difference may cause it to break.

3 Remove the drawer frame. (Always remove the glass cover before you take out the drawer frame.)

Lift the frame off the supports at each side and back, pull it forward, tilt it and take it out.

To replace:

1 Lower the frame until it rests on the supports at each side and back.

2 Replace the glass cover, pushing its rear edge firmly into the rear frame channel and gently lowering the front into place.

3 Replace the drawers.

Instructions Troubleshooting Tips Consumer Support

7

Page 7
Image 7
GE 16, 17, 18 About storage drawer and cover removal, Adjustable Humidity Drawer on some models, Drawer and Cover Removal

16, 17, 18 specifications

GE, or General Electric, has long been a pioneer in the realm of scientific and technological advancement, especially in the sectors of power generation and aviation. Among its notable innovations are the GE 16, 17, and 18 series turbines, which showcase the company's commitment to efficiency, reliability, and performance.

The GE 16 series turbine represents a significant leap in gas turbine technology, designed specifically for the needs of combined cycle power plants. It incorporates advanced combustion technologies that enhance fuel efficiency while minimizing emissions. One of the stand-out features of the GE 16 is its advanced materials that can withstand higher temperatures, allowing for increased operational flexibility and efficiency. This turbine is also equipped with sophisticated digital control systems, enabling operators to optimize performance in real-time, ensuring that the power output is maximized.

With the GE 17 series, GE further raised the bar with notable enhancements in both performance and sustainability. The 17 series is targeted toward the renewable energy transition, designed for greater adaptability to fluctuating energy demands tied to wind and solar power. Key features include the integration of hybrid systems that enable fuel flexibility, allowing operators to switch between natural gas and other fuels based on availability and cost. The GE 17 series also employs advanced aerodynamic designs that reduce drag and improve overall efficiency, making it one of the preferred choices for modern power plants.

The GE 18 series showcases a culmination of GE’s research and development efforts, focusing heavily on digital innovation. This series takes advantage of the Industrial Internet of Things (IIoT) to provide predictive maintenance capabilities, which can significantly reduce downtime and increase operational efficiency. The GE 18 is built with an emphasis on modularity, allowing for easier upgrades and maintenance. This series also stands out for its exceptional operational reliability, ensuring that energy providers can meet consumer demands without interruption.

In summary, the GE 16, 17, and 18 turbines reflect GE's dedication to evolving energy technologies. Each series brings unique features and innovations to the table, ensuring efficiency, flexibility, and sustainability in power generation. Through continuous investment in research and development, GE remains at the forefront of the energy sector, helping integrate traditional and renewable energy sources to meet the world’s growing power needs.