Safety Instructions
About the refrigerator shelves, bins and water dispenser.
Not all features are on all models.Rearranging the Shelves
Glass and wire shelves in the refrigerator compartment are adjustable.
Operating Instructions
To Remove
2 Lift up and out
To Replace
1 Tilt up
1 | Insert |
| top hook |
|
|
2 | Lower to |
| lock in place |
Instructions
Slide-Out Spillproof Shelf
The | Make sure you push the shelves all the way back |
to reach items stored behind others. The | in before you close the door. |
special edges are designed to help prevent |
|
spills from dripping to lower shelves. |
|
Troubleshooting Tips Installation
Adjustable Door Bins
Adjustable bins can easily be carried from refrigerator to work area.
To remove: Tilt the bin up and pull out on the molded supports until it comes completely out of the door.
Snugger | To replace or relocate: Select desired height, |
| engage the bin in the molded supports of |
| the door and slide the bin in. The bin will |
| hook in place. |
|
|
The snuggers help prevent tipping, spilling or sliding of small items stored on the door shelf. Place a finger on either side of the divider near the front and move it back and forth to fit your needs.
Consumer Support
Brita® Water Dispenser
To install: Grasp the dispenser as shown.
Using a slight backward tilt, align the mounting brackets on the dispenser with the support brackets in the refrigerator door.
Gently slide the dispenser back until it touches the door and lower it into the support brackets.
To remove: Tilt the dispenser up at the front and pull it forward on the molded support brackets until it comes completely out of the door.
6
