Installation Instructions

B

Electrical Connections cont.

NEW CONSTRUCTION AND FOUR WIRE CORD CONNECTION KIT

B3 Complete 4 wire

3 Screws

cord kit. Below are

 

step by step

Gound

 

Screw and

B8

Attach the green lead

 

below the junction

Ground

 

block with the ground

Screw

 

screw that was

 

removed earlier.

 

 

instructions on

 

Ground Strap

 

how to install the

 

Location

 

 

 

 

kit.

 

Strain

 

Connection

Relief

 

Clamp

 

 

Plate

 

B4

Remove the screws on

Remove

 

the terminal block with

3 screws

 

 

 

 

 

a 1/4” nut driver or

 

 

B9

Connect the red and black leads to the outside terminals and the white lead to the center terminal.

Red or

Black WhiteGround (Green)

Red or

Black

phillips screwdriver.

B5

Knockout in center of connection plate may be taken out

B6

Remove the ground

Ground

screw using a 5/16”

Screw

 

 

 

nut driver, then

Ground

 

remove and discard

 

Strap

the ground strap. Do

not discard the ground screw, you will need it later.

B10 Push the cord upward (to relieve strain), while tightening the strain relief clamp.

B11 Re-install the wire cover with the 5 screws removed earlier. Make sure the wires do not become pinched between the wire cover and mainback.

Wire

Cover

B7

Install the four-wire cord and strain relief through the hole in the connection plate.

4 wire

cord kit

Connection

Plate

Strain

Relief

Clamp

6Three-wire connection continued on following page

Page 6
Image 6
GE 229C4053P447-3 1, 31-10463 Electrical Connections, NEW Construction and Four Wire Cord Connection KIT

31-10463, 229C4053P447-3 1 specifications

The GE 229C4053P447-3 1,31-10463 represents a significant advancement in aerospace technology, particularly in the field of gas turbine engine components. This part is integral to ensuring the reliable and efficient operation of various aircraft systems.

One of the primary features of the GE 229C4053P447-3 is its robust design, capable of withstanding extreme temperatures and pressures encountered during flight. Manufactured using advanced alloys and composite materials, this component offers excellent durability and resistance to fatigue, significantly enhancing the lifespan of the engine. Its construction reflects GE's commitment to quality and innovation in aerospace engineering.

In terms of technologies, GE 229C4053P447-3 incorporates state-of-the-art manufacturing processes, including precision machining and advanced casting techniques. These methods ensure that each component meets stringent safety and performance standards, a critical requirement in the aviation industry. The integration of cutting-edge technologies in the design and production of this part allows for better performance metrics and operational efficiency.

A standout characteristic of the GE 229C4053P447-3 is its contribution to overall engine efficiency. The component plays a vital role in optimizing fuel combustion processes, thereby reducing emissions and operating costs. This aligns with the industry's increasing focus on sustainability and environmental responsibility. The part is engineered to enhance airflow and thermodynamic efficiency within the engine, resulting in improved thrust performance.

Furthermore, the GE 229C4053P447-3 is designed with maintenance and serviceability in mind. Its modular construction allows for easier access and replacement during routine maintenance, minimizing downtime for aircraft operators. This feature is particularly valuable for maintaining high operational readiness in commercial and military aviation sectors.

In conclusion, the GE 229C4053P447-3 1,31-10463 exemplifies GE’s innovative spirit in aerospace manufacturing. With its advanced materials, cutting-edge technologies, and focus on efficiency and longevity, this component is essential for modern aircraft engines, aligning with industry demands for performance, reliability, and sustainability. As aviation technology continues to evolve, components like the GE 229C4053P447-3 will remain at the forefront of enhancing flight capabilities and operational excellence.