GE 31-10463 Installation Instructions, Electrical Connections cont, ground strap

Installation Instructions

B

Electrical Connections cont.

THREE- WIRE CORD CONNECTION KIT

Connect the outer wires to the outside B7a terminals and the center wire to the

B3a

Complete 3 wire cord kit. Below are step by step instructions on how to install the kit.

	Grounded
3	Neutral
Screws	Terminal
	(White)
	Ground Strap
Center	Ground Screw
Wire
	Strain
Connection	Relief
Plate	Clamp

center terminal. Do not remove the

ground strap

Grounded

Neutral

Terminal

(White)

Outer

Wire

Center

B4a	Remove the screws on	Remove
	the terminal block with a	3 screws

1/4” nut driver or phillips screwdriver.

B5a

Knockout in center of connection plate may be taken out

WireOuter

Wire

B8a Push the cord upward (to relieve strain), while tightening the strain relief clamp.

B9a Re-install the wire cover with the 5 screws removed earlier. Make sure the wires do not become pinched between the wire cover and mainback.

B6a

Install the three-wire cord and strain relief through the hole in the connection plate.

3 wire

cord kit

Connection

Plate

Strain

Relief

Clamp

Wire Cover

Special note: If local codes require an undgrounded neutral, you must do the following:

a. Remove ground strap.

b. Fasten the white wire to the center terminal. c. Use grounding terminal or lead to ground unit

in accordance with local codes.

7