Installation | Self Cleaning |
Electric Range | |
Instructions | EER2000, EER3000 JBP24, JBP26, JBP30, JBP35, JBP48, JBP64, JBP65, |
JBP66, JBP67, JBP70, JBP78, JBP79, JBP85, JB940, JB960, JB965 |
“If you have questions, Call
www.GEAppliances.com”
Skill Level: High Average Low
Completion Time: 1 to 3 Hours
Proper installation is the responsibility of the installer. Product failure due to improper installation is not covered under the GE Appliance Warranty. See the Owners Manual for warranty information.
CAUTION: Before you begin | • NOTE TO INSTALLER- Be sure to leave |
Read these instructions carefully and | these instructions with the consumer. |
completely. | • OWNER- Keep these instructions for future |
• IMPORTANT- Save these instructions for | reference. |
local inspector’s use. | • WARNING- This appliance must be |
• IMPORTANT- Observe all governing codes | properly grounded. |
and ordinances. |
|
|
|
Parts Included
Materials Needed
Lag Bolts Anchor Sleeves
(For Concrete Floors Only)
( UL Approved 40 AMP)
4- Wire Cord OR 3
4’long4’long
Tools You Will Need |
|
| |||
|
| Pencil | Safety | 4 | |
|
| 3 | |||
|
| 2 | |||
|
| 1 | |||
|
|
|
| ||
Adjustable wrench |
| Glasses | Tape Measure | ||
1/4”Nut |
| Drill with |
|
| |
driver |
|
|
| ||
| 1/8” Bit |
|
| ||
|
|
|
| ||
| Phillips | 5/16” Hex Head | |||
| Screwdriver | ||||
Level | Screwdriver | Nut driver | |||
|
| ||||
Pub. No. |
|
|
|
| |
|
| 1 |
|
|